Choosing The Correct Drill Press.

Choosing The Correct Drill Press.

When you need a drill press the number of choices can be a bit too much to take in. This article will help you decide which type of drill press will match your expectations and the work it will need to be able to carry out.

Choosing The Correct Drill Press.

Drill press for woodworking or metalworking.

Normally you just switch the drill bit for to match whatever material you are working on and away you go but if you are going to be drilling thick grade steel then you will be better off finding one that can stand up to that kind of use on a day to day basis.

Otherwise, you could end up with one that cannot tackle tough materials and you will have wasted your time and your money.

  • Drill press brands
  • There is a massive amount of power tool manufacturers and the same goes for the number of models too.
  • Some of the most well-known brands are…
  • Wen drill press
  • Delta drill press
  • Dremel drill press
  • Dewalt drill press
  • Jet drill press
  • Ryobi drill press
  • Grizzly drill press
  • Porter cable drill press
  • Bosch drill press
  • Drill press types

There also various types of drill presses you can purchase

  • Benchtop drill press
  • Freestanding drill press
  • Portable drill press
  • Mini drill press

As you can see there is plenty of choices and you will need to drill down into them to find the best fit for you.

You can also use a power tool review site to help you decide based on their research. I have checked through some and my favorite tool info site is https://toolinspector.com/best-drill-press/ because they really analyze the tools under a microscope.

Whatever you choose you will need to make sure it is backed with a good amount of warranty so you have the peace of mind of knowing you can get a refund or replacement if the worst comes to the worst.

Drill press prices

The good news is that with there being so many drill presses to choose from then you will be able to find the right one for you at the right price.

You can get a good quality drill press under $100 but it won’t stand up to industrial or commercial type usage that is asking for too much.

You can though get a good woodworking drill press or metalworking drill press for under 100-200 dollars no problem.

Wen offers some really good drill presses in the lower price brackets.

Drill bits

Another thing to remember is to purchase a decent set of drill bits to go with you drill press because the machine is only as good as the drill bits you are using. It doesn’t matter if you have the best industrial drill press money can buy if you don’t have the drill bits to go with it.

They are reasonably priced and last a good while if you look after them properly. They will also make your life easier and your work more tidy so it is a no brainer really.

Do-it-all Drill-press Table Woodworking Plan from WOOD Magazine ...

Drill Press Safety

Wearing suitable PPE can really save you from any injuries and mishaps. Little metal pieces and wood dust and big particles can cause real damage to your face, eyes and lungs so make sure you have goggles and a dust mask when you are operating these machines.

Another good tip is to use any guards or safety features the drill press may have and always make sure there is a power cut off in reach for the operator just in case of an emergency.

It may sound far fetched but if you get snagged in the drill press then it can quickly become a fight to keep your arm attached to your body but if you have an emergency cut off switch you can easily stop anything that serious from taking place.